|
 DX-Series
Distribution Cables, Riser-Rated & Plenum-Rated
- Suitable for both indoor and outdoor
use -- no need to splice outdoor cable to indoor cable at the
building entrance.
- Flame-retardant for indoor
installations.
- Fungus-resistant, water-resistant and
UV-resistant for outdoor use.
- Can be armored for additional
protection in buried and overhead installations.
- Compact design for limited conduit
space.
- Smaller, lighter and more economical.
- High strength to weight ratio.
- Flexible, rugged, high-strength
construction for long cable pulls.
- Helically stranded cable core for
flexibility, survival in difficult pulls, and superior mechanical
protection for the optical fibers.
- Lower total installed costs.
- Longer distance runs where size and
cable cost are more significant.
- Tight-buffered coating on each optical
fiber.
- 2 to 156 fibers, higher fiber counts
are available upon request.
|
|
 BX-Series
Breakout Cables, Riser-Rated & Plenum-Rated
- Most rugged and "installer
friendly" cable design for Local Area Networks.
- For installations where ease of
termination and termination cost are important factors.
- Short and moderate distance links
between buildings or within a building, where multiple termination
points are needed.
- Core-Locked™ outer jacket design for
installation survivability long-term, trouble-free service.
- Subcables are designed for direct
termination with standard connectors.
- Helically stranded cable core for
flexibility, survival in difficult pulls, and superior mechanical
protection for the optical fibers.
- Suitable for both indoor and outdoor
use -- no need to splice outdoor cable to indoor cable at the
building entrance.
- Flame-retardant for indoor
installations.
- Fungus-resistant, water-resistant and
UV-resistant for outdoor use.
- Tight-buffered coating on each optical
fiber.
- Elastomeric jacket encases each
optical fiber and surrounding aramid strength members to provide a
ruggedized subcable.
- 2 to 156 fibers, higher fiber counts
are available upon request.
|
|
 GX-Series
Subgrouping Cables, Riser-Rated & Plenum-Rated
- Tight-buffered multifiber design
allows subcables to be routed to multiple locations such as wiring
racks or wiring closets.
- Multifiber subcables, each similar to
the DX-Series Distribution Cable.
- Best design for multimode and
single-mode fiber hybrid/composite cables.
- Easy to identify subcables for ease in
splicing and routing.
- Helically stranded cable core for
flexibility, survival in difficult pulls, and superior mechanical
protection for the optical fibers.
- Strongest, most crush-resistant cable
available.
- Tight-buffered coating on each optical
fiber.
- Core-Locked™ outer jacket surrounds
the subcables.
- Suitable for both indoor and outdoor
use -- no need to splice outdoor cable to indoor cable at the
building entrance.
- Flame-retardant for indoor
installations.
- Fungus-resistant, water-resistant and
UV-resistant for outdoor use.
- Subcables of GX-Series Plenum cables
are individually plenum-rated and can be UL plenum labeled.
- 12 to 864 fibers in various subgroup
cable sizes are available.
|
|
 AX-Series
Assembly Cables, General-Purpose and Special-Purpose Cables
- Resilient and flexible for jumpers,
patch cords and pigtails.
- Suitable for general purpose indoor
use, such as routing connections in patching systems.
- Short "patch cord" cables
ideal for links between electronic equipment and main fiber optic
cables.
- Flame-retardant for indoor
installations.
- Compatible with all standard fiber
optic connectors.
- 1 (simplex) and 2 (duplex) fibers
available.
- Tight-buffered coating on each optical
fiber.
|
|
 M-Series
Aerial Messenger Cables
- Figure-eight construction for use with
standard messenger clamping and support hardware. three options are
available:
- Steel (SS) Messenger is a stranded
stainless steel messenger wire available for ultimate mechanical
and environmental survivability.
- Galvanized Steel (GS) Messenger is
a cost-saving option where ultimate durability and survival are
not required.
- Dielectric (DS) Messenger is a
fiberglass/aramid strength members/epoxy messenger for high
strength. This all-dielectric construction is ideal for use near
electrical power lines.
- Wide operating temperature range of
-55oC to +85oC.
|
|
 Armored
Cables:
DX-Series Distribution, BX-Series Breakout and GX-Series Subgrouping
Cables
- Cable is suitable for direct burial
and aerial applications.
- Corrugated steel tape protects the
fiber optic cable from rodents, and provides additional stiffness
for aerial lashing, if required.
- The armor is easily removed with an
internal aramid strength member ripcord, leaving a flame-retardant
inner cable suitable for interior and exterior use. This eliminates
the need to splice outdoor cable to indoor cable to mee the National
Electrical Code's 50-foot maximum length requirement for outdoor
cable used inside buildings.
- Armored jacket is an add-on option
which can be applied to most of the riser-rated and plenum-rated
cable products.
- Suitable for direct field termination
with most standard optical connectors.
|
|
 Military
Tactical Cables:
D-Series Distribution Cables
- Crush-resistant and resilient with a
thick layer of aramid strength members.
- Round cable design for easy
installation and survivability.
- Polyurethane jacketed for abrasion,
cut and chemical resistance.
- Operating temperature of -55oC
to +85oC.
- 500 micron acrylate primary buffer
coating over each optical fiber.
- 900 micron diameter hard elastomeric
secondary tight buffer protection on each optical fiber.
- Fiber count from 2 to 24 in a single
cable. Call the factory for additional design options.
|
|
 Military
Tactical Cables:
B-Series Breakout Cables
- Breakout cable design with an
individual color-coded subcable surrounding each optical fiber.
- Crush-resistant and resilient with two
separate layers of aramid strength members -- in the subcables for
individual single-fiber connector termination, and overall for
termination to multiway connector backshells or other housings.
- Round cable design for easy
installation and survivability.
- Polyurethane jacketed for abrasion,
cut and chemical resistance.
- Operating temperature of -55oC
to +85oC.
- 500 micron acrylate primary buffer
coating over each optical fiber.
- 900 micron diameter hard elastomeric
secondary tight buffer protection on each optical fiber.
- Fiber count from 2 to 24 in a single
cable. Call the factory for additional design options.
|
|
|
For additional information
and pricing on these and other products call us at
1.800.413.6623
or email
sales@awc-corp.com or visit our
Requests web
page.
 |
