|
MODELS
|
 |
DS III
Pressure Transmitter
The new SITRANS™ DS III pressure
transmitter continues with the ease of operation tradition. Local
configuration of all operational parameters can be made using
magnetic push-buttons on the instrument, simplifying the user
interface. This eliminates the need for a programming device, such
as a hand-held communicator or laptop computer.
The DS III also incorporates
diagnostic capabilities including high- or low-signal limit
alarms; peak value registers that store the maximum and minimum
values for pressure, sensor temperature, and electronics
temperature; and a dual-time programmable “watchdog” that alerts
the user when pre-set maintenance and calibration times occur.
The SITRANS DS III transmitter is
available for measuring pressure, absolute pressure, differential
pressure, flow or level. |
|
 |
XTC Crtical
Transmitter The
XTC™ Critical Transmitter is the first pressure transmitter
certified for critical processes in SIL2/AK4 and SIL3/AK6
applications. Assessment and certification was performed by the
Germany-based TÜV Product Service, the leading experts in
programmable electronic safety instrumented systems.
Equipment is rated for the amount
of safety risk reduction required by a particular application. |
|
 |
SITRANS F Ultrasonic Flowmeters
The SITRANS™ F US ultrasonic flow
meter features a helix-shaped ultrasonic signal ideal for the
measurement of electrically conductive and non-conductive liquids
(e.g. solvents or organically based media). This patented sound
guidance system:
-
Significantly increases the
reliability of the speed profile sampling in the flow meter’s
measuring pipe.
-
Allows the SITRANS F US to provide a
reliable measurement regardless of low flow rates, low nominal
bores, high viscosity, or turbulence.
The SITRANS F US ultrasonic flow meter
is easy to install; there are no obstructions in the flow pipe,
and no moving part to break or wear out. Operating costs are
reduced because there is no need to artificially increase flow
rates with power-hungry pumps to counteract any pressure drops.
Operation of the SITRANS F US flow
meter is simplified by using an easy-to-follow menu via four
pushbuttons on the glass panel. It is available with a digital
output via PROFIBUS-PA profile 3 protocol, or with an analog 4-20
mA output with HART communications. A wide range of diagnostic
functions ensures the reliability of the flow measurement. Process
temperatures can range from –4F up to 356F. The SITRANS F
ultrasonic flow meter is FM approved for use in Class I, Div. 2
areas. |
|
 |
SITRANS FM
Electromagnetic Flowmeter
The SITRANS™ FM is
suitable for measuring the flow of almost all electrically
conducting liquids, as well as sludges, pastes and slurries. A
prerequisite is that the medium must have a certain minimum
conductivity. The temperature, pressure, viscosity and density
have no influence on the result.
Even corrosive media
can be measured providing suitable materials are selected for the
tube liner and the electrodes. Solids present in the medium do not
usually influence the result.
Special features of
the Intermag/Transmag transmitters include:
-
Fast signal
processing with 16-bit micro controller
-
Automatic
recognition of sensor type and calibration data as a result of
smartPlug
-
HART®
communication
-
Self-monitoring
-
Simple menu
operation with two-row display (option)
-
Monitoring of sensor
using megnetizing current and wet electrode function
-
Analog output and
digital outputs for pulses, device status, limits, flow
direction
-
Switch input for
resetting counter values and measuring equipment (PZR)
-
Menu option for
batch mode
|
|
 |
340S SteaMeter Flowmeter
The Model 340S
SteaMeter™ is a differential pressure type flowmeter capable of
measuring saturated steam flow.
It combines accurate,
reliable differential pressure measuremnt with standard steam flow
calculations. The SteaMeter can calculate and transmit mass flow,
energy flow, or differential pressure with a standard 4-20 mA
output signal. It can also locally display static pressure, mass
flow total, and energy flow total. These three variables are
available to other smart devices via HART®
|
|
 |
343 Temperature Transmitter
The
343 Smart Temperature Transmitter incorporates advanced
temperature measurement into a small economical package that
accepts a wide range of input types and ranges.
-
High accuracy,
typically .05% of reading, guarantees process control integrity
-
HART®
communication allows quick, easy configuration
-
Input/Output
isolation supports the use of grounded or ungrounded sensors
-
DIN rail and
field-mountable versions allow maximum design
flexibility
|
|
 |
SITRANS T3K Temperature Transmitter
The STRANS T3K PA
Transmitter with PROFIBUS PA connection can be used in all
applications. Its compact size enable it to be installed in the
sensor head type B (DIN 43 729) with raised cover or larger. The
following sensors/signal sources can be connected via its
universal input modules.
The SITRANS TK-H and
SITRANS TF Transmitters' two-wire system, converts the signals
from RTD's, resistance based sensors, thermocouples or voltage
sensors into a load-independent direct current corresponding to
the sensor characteristic.
|
|
|
|
The
Siemens family of transmitters, with various models and process
connections can accommodate virtually any application. In addition
to their accuracy of measurement and their ruggedness, Siemens
transmitters have always stood for one thing: greater ease of
operation. 